Adjusting the position of the light is achieved by adjusting the adjustment knob at the corresponding position on the back of the headlight. The parts that need to be adjusted and the tools used are different for different models, and they need to be determined according to the specific model.
Introduction to automobile light adjustment standards--requirements for the beam position of headlamps
When inspecting the dipped beam position of the headlamp, the height of the corner or midpoint of the light and dark cut-off line of the headlamp should be 0·6H-0·8H (H is the reference of the headlamp when the headlamp is 10m away from the screen. The height of the center, the same below), and the deviation of the horizontal position from left to right shall not exceed 100mm.
The adjustment of the high beam single-beam lamp of the four-lamp headlamp requires that the center of the beam on the screen is 0.85H-0.9OH from the ground, and the horizontal position requires that the left lamp should not be more than 100 mm to the left and not more than 170 mm to the right. ; The right light shall not be greater than 170mm to the left or right.
Introduction to automobile light adjustment standards-the role of headlights
Detect the role and requirements of automobile headlights Label: The role of automobile headlights The requirements for the beam position of the headlights. 2. Requirements for the beam position of the headlight 1. When a motor vehicle inspects the position of the low beam of the headlight, the headlight is 10m away from the screen, and the height of the corner or midpoint of the light and dark cut-off line of the beam should be 0.6H- 0.8H (H is the height of the reference center of the headlamp, the same below), the deviation of its horizontal position from left to right shall not exceed 100mm. 3. When the motor vehicle is equipped with high beam and low beam double beam lamps, it is mainly to adjust the low beam beam. A four-lamp motor vehicle is allowed to have two symmetrical lamps that meet the requirements of the two-lamp system as qualified.